Posts

What Do Deer Eat in Fall And Early Winter?

What Do Deer Eat? | Deer Food and Nutritional Requirements for Fall

White-tailed deer are wrapping up one of the most physically demanding time periods of the year; the fall rut and breeding season. This is a time when bucks run themselves ragged in search of does. In fact, a buck can lose up to 30% of his body weight during the rut from all of that chasing and not replenishing his nutritional requirements by taking time to eat. What makes things even more difficult for bucks after losing all of that body weight is they are about to enter into the winter season. Winter is one of the most stressful periods a buck can go through, particularly in the north where winters can be severe. So how can you ensure that bucks on your hunting property have everything they need to survive the winter? What do deer eat in the fall and early winter to build reserves? What is the ideal deer food that can you provide through supplements or habitat changes? This article will discuss some of the natural forages deer rely on during this time of year and why GYT90 supplements tend to work so well for your deer herd.

 

What’s for Dinner?

Deer eat a lot. On average, a deer can eat anywhere from 6 to 8% of its body weight every day. That means that a 150-pound deer can eat up to 12 pounds of food per day! To put that in perspective, that’s like you eating 48 quarter-pound hamburgers a day just to survive…Now think about how much forage it would actually take to weigh up to 12 pounds. That’s a lot of forage!  

So what does a deer eat? Deer will primarily eat browse (woody portion of leaves and stems), forbs (broad-leaved plants), mast (acorns, apples, etc), and grass. Although these are the main foods deer like to eat, the quantity of these different foods differ throughout the year and the region you are hunting.  

Deer Food in Your Region

For example, deer in the Midwest will have a larger portion of their diet comprised of agricultural crops then deer from a non-agricultural area like the northeast. Although a deer’s diet will vary throughout the year, woody browse tends to make up the majority of a deer’s diet throughout the winter, regardless of where they are found. Woody browse is usually more abundant throughout the winter months after crops are harvested and is high in fiber, but also nutritious, especially new stems and shoots from species like black berry, greenbrier, and understory saplings like ash. Think about how much a deer has to eat to survive. Finding up to 12 pounds of waste grain to eat is hard work and if you don’t have standing crops available for deer, then they are going to have to find food elsewhere.

 

Standing crops like corn and soybeans are a great source of energy during the early winter months like November and December and also throughout the rest of the winter. Specifically corn lacks a high level of protein, but has a high fat and carbohydrate content, around 4% fat and 75% carbohydrates. On the other hand, soybeans contain a high protein content (around 40%), and around 20% fat content but are lower in carbohydrates than corn. These high quality sources of energy are just what bucks need to help them recover after an intense breeding season and will help them survive the winter months. Remember, a buck can’t start growing his antlers in the spring until after he has replenished all of his fat reserves that he lost in the fall and winter. That means that the better the body condition a buck is in during winter, the sooner he can start growing his antlers in the spring. The sooner he can start growing his antlers means more time he has to grow them during the summer! 

Why GYT90 Supplements Work

So what can you do to help ensure bucks on your property go into and come out of winter in the best possible shape? That’s simple; make sure they have foods with high-quality fats and a high energy content available to them. This is where GYT90 shines. GYT90 uses a natural crude soybean oil to deliver its 90+ minerals. This crude soybean oil is high in natural fats (95%) and is full of calories meaning plenty of energy for deer consuming it. Both fats and calories are needed by whitetails during and after the rut. Now to really ramp up the effects of GYT90, you simply need to pour it over corn, another food item high in energy. This combination of GYT90 and corn is a quality combination. Deer are not only getting all of the quality fats and energy they need to help them survive the winter, but they are also getting all of the minerals they need to stay healthy. The potent combination delivers carbs, calories, and a very high fat content, enough to pull deer into the site whether you are feeding, hunting over bait, or just enhancing the deer herd health.

But how many supplemental feed and mineral sites do you need to really help your herd out? That tends to depend on how many acres you are hunting. A good rule of thumb is to have one supplemental site for every 100 acres of property. You can place a 50-pound sack of corn mixed with GYT90 at each site. This should be enough to help supplement the deer herd. Remember, that this combination should only be used as a supplement because you don’t want to, and probably can’t afford, to totally feed your deer herd with corn. Another thing to keep in mind is that, although corn is high in energy, it is difficult for deer to digest. If deer eat too much corn too fast, they can actually die from what’s called acidosis. To avoid this, be sure you place your supplemental sites near woody browse so deer can browse on both food items. This will ensure they can balance the pH levels in their rumen while consuming corn. Or start the corn and GYT90 mixture off slowly, feeding small amounts gradually every week to allow the deer’s rumen to adjust for digestion.

 

If your goal is to grow as big of deer as you possibly can, then deer management is a year-round thing that doesn’t end after you put up your bow or gun for the year. It requires you to think about what deer need throughout the year. Remember, if nutrition is lacking at any point in time throughout the year, then that reduces a bucks chances of reaching his maximum potential. Hopefully this article has opened your eyes to the importance of winter nutrition. Be sure to give GYT90 a shot this fall, it may just help your herd reach its potential.

 

Attracting Deer to Your Hunting Setup

Tactics to Make Your Deer Set Up the Spot on the Spot

The pursuit of whitetail deer has hunters nationwide working to create opportunities and increase the odds of a whitetail encounter for the hunt. Whether you love hunting deer for the camaraderie and fellowship, for the challenge that the pursuit of trophy provides, or to provide meat for your family; one thing remains the same, you need deer in your area to hunt. When it comes to influencing deer, their habits, and the area they live in; there are multiple strategies that can be effective at attracting deer to your hunting area and increasing hunting opportunities. Utilizing deer attractants in your hunting strategy will increase your odds of success, and your enjoyment of the hunt.

The term “deer attractant” is a generic term, and it can encompass a wide variety of tools and methods that are proven to attract deer into a certain area. Some of the means to attracting deer to a specific spot include the use of: food plots, baiting, mineral sites, and deer scents. Hunters can utilize one or many of these methods in combination to attract deer into their hunting area depending on factors like state and local laws, available resources, and terrain. Attracting deer to your spot on the spot, and providing a hunting opportunity is critical to your hunts success. With a little strategic planning, and the right tools put to work, you can increase your number of whitetail encounters and shooting opportunities.

  

Food Plots

The use of food plots as a deer hunting attractant is as old as deer hunting itself. Natural food plots such as acorn mass and large crop fields continue to be an effective draw for deer. The use of food plot crops planted specifically with deer hunting in mind is becoming more and more common. From larger plots of forage soybeans covering 10 or more acres, to small parcels of broken tree canopy planted to brassica; various crops including corn, milo, turnips, peas, clover, and alfalfa will attract and keep deer.

One of the surest ways to attract deer is through their stomach. Whitetail deer are ruminant animals and require both quality protein and fiber forage to survive. Supplying quality groceries to the deer herd you are hunting is the perfect way to increase the frequency of deer in your area, and the amount of time they spend in your core hunting zone.

Baiting

For the same reason that food plots are so effective, bait as a deer attractant can also be extremely effective. An easy meal provided by a corn pile, a gravity feeder filled with a grain mix, or a prepared liquid deer bait is impossible for deer to resist. The nutritional demands of the breeding season, surviving through harsh winter conditions, and regaining lost nourishment expended during the rut drive deer to seek the most nutrient dense feed supply possible.

Keep it Legal

Using bait to attract deer is extremely effective, and a proven tactic for all seasons; including summer feeding programs, pre rut, peak rut, and post rut recovery. However, laws vary widely from state to state, from public to private, and even by date. Make sure you know and abide by the state and local regulations when it comes to baiting deer, hunting over bait, and when you bait.  You may find your state allows hunting deer directly over a bait pile, a late season tactic that is sure to produce results. On the other hand, some states allow baiting, but restrict the distance to the bait. Still other states allow baiting, but all bait must be removed or consumed 10 days prior to season.

In states that only allow baiting out of sight of the hunter, or a certain distance away from the hunter; bait is a fantastic tool for manipulating deer movement. Bait stations between bedding and feeding areas can draw deer within range of your stand. Utilizing pinch points and travel corridors, and strategically placing stands for prevailing winds, using bait in a state that does not allow hunting over bait can produce amazing opportunities while staying well within the law.

Mineral

Just like all other animals, deer require certain essential minerals to remain healthy and to best utilize the nutrients they digest from feed. Essential minerals like calcium and sodium are natural attractants to deer, and in many states offering these minerals to deer is not classified as baiting. Be careful however when offering mineral as a bait station, some states classify mineral as bait if it is incorporated into the soil from rains. This can be tricky if the state you’re hunting doesn’t allow hunting over, or near a leached mineral site. There are ways to still offer the minerals deer crave, and remain on the right side of the law.

 

Whether your state allows hunting over bait, or not; or classifies mineral as bait, or not; make sure and consider using essential minerals as an attractant in accordance with regulations. Mineral sites and offerings are perfectly paired with other types of deer attractants to make your hunting area truly dynamic for whitetails.

Deer Scents

According to research conducted at Mississippi State University, deer can smell somewhere between 500 and 1000 times better than humans. It has been said that whitetail deer see the world through their noses. We have all been there, watching a deer that has no idea we are nearby, then the wind switches. One little gust of scent carrying wind and that deer is off, no questions asked. Harnessing scents that attract deer has been tested for decades, and year after year, hunters fill their tag and swear by a scent product that helped them do it.

By coupling a deer’s amazing sense of smell with their biological phases, the wind currents, and a strategically placed stand; deer scents can be used to bring that old wary buck into range. There are numerous deer scent products on the market, but a couple of the most popular include doe in estrus urine, and rutting buck scent. By tricking a buck’s nose into thinking there is an estrus doe nearby, or a competing buck in the area, you can play on a deer’s most advanced defense to create an opportunity to fill your tag.

Build an Arsenal and Develop a Strategy

Food plots, baits, mineral, and scents are all effective tools that you can put to work in the deer woods this season. By coupling multiple tools into an effective arsenal you will be able to influence where the deer travel and find an opportunity to fill your tag. Make no mistake, whitetail deer are elusive, wary, and always on their guard; but by working a strategy to make your stand the spot on the spot, it is possible to even the odds.

Tips for Deer Hunting Over Bait and Attractants

Deer Bait and Attractants 101

It’s an exciting time of the year for many hunters as we approach the end of summer and begin to entire the cooler months of Fall.  The grocery supercenters and gas stations in most suburban and rural areas start setting pallets of one of the highest selling hunting products on the market; deer bait.  Suddenly, the timber and fields where we hunt are deposited with concentrated piles of sustenance and we have been practicing this ritual ever since we can remember.  Pouring out bait to attract whitetail deer can sometimes be complicated, but it doesn’t have to be. 

Hunters have been baiting, attracting, and feeding deer for decades, with the main purpose of enticing that mature buck to come into shooting range during daylight hours.  In recent years, and with the wide use of trail cameras, hunters are now using bait to create feeding hubs that generate numerous quality trail camera photos of their deer herd.  As we study to learn more about the nutritional biology of whitetails, it’s been discovered that the supplemental feeding of deer shows benefits if done during the off-season. Even with all the complexity and politics surrounding the world of baiting, deer feed and deer corn continues to fly off the shelves across all regions in North America.  The basic principles of baiting remain unchanged, however, new products, better strategies, and advanced tactics can dramatically improve the success you might achieve when baiting and attracting deer.

What is the Best Bait for Deer?

A whitetail buck’s antlers are comprised of 22% calcium, 11% phosphorous, and the remaining balance is a mix of protein, trace minerals, and ash. When searching for a feed, attractant, or bait product, it’s important to look for these key ingredients of calcium and phosphorous on the package. By far the most popular and widely used bait for attracting whitetails is corn.  Not only is deer corn highly consumed and well received by whitetails in almost every habitat across the continent, but it’s also one of the cheapest options for hunters.  Corn contains several of these essential nutrients for whitetails that improve their health and ability to survive leading into winter.  Baiting with corn is always a highly recommended source for whitetails and remains as one of the best product choices out there. However, hunters using corn should keep in mind that it can be enhanced.

PHOTO: GYT90’s crude soybean oil content is thick enough to cover the corn kernels with a glaze and acts as an attractant enhancer from its soybean aroma. It also supplies heightened taste and an instinctual need whitetails have for the highest nutritional intake for their time feeding.

One product that is sometimes overlooked, but proves to be highly effective year in and year out, is soybeans.  Since soybeans aren’t commercially sold at the same level corn is, outdoorsmen and outdoorswomen don’t seem to pursue it as much.  However, if you have ever hunted over a freshly cut soybean field, or a standing soybean field in the late season you have seen the impact they have on deer. These locations can act as a free bait piles and will definitely attract several deer.  Corn and soybeans contain a higher combined percentage of calcium and phosphorous than acorns, apples, alfalfa, or clover. Not to mention carbs and fats deer seek in the fall.  Without soybeans being readily available, hunters will have a hard time accessing this without planting soybean food plots. Fortunately there is another option! 

New deer bait and feed products surface frequently, but only a select few make an impact on everyday hunters. One such product is something that can take standard deer corn bait sites, and enhance them with the nutritional power, scent, and taste of soybeans. The soybean oil based deer mineral and feed supplement “GYT90” gives hunters the best of both worlds when mixed with a standard bag of corn. GYT90’s crude soybean oil content is thick enough to cover the corn kernels with a glaze and acts as an attractant enhancer from its soybean aroma. It also supplies heightened taste and an instinctual need whitetails have for the highest nutritional intake for their time feeding. Deer corn, enhanced with GYT90’s soybean oil based nutrition and 90+ mineral supplement means that your bait site is optimized for attracting deer. Now it’s time to discuss where to put this potent mixture.

How to use GYT 90: Corn

How to use GYT 90: Corn

Posted by GYT 90 on Friday, April 13, 2018

 

The Best Locations for Deer Bait and Feed Sites

With the best deer bait and feed in hand you need to find the most effective locations for hunting, recon, or attracting deer.  Specific bait locations can vary based on terrain, wind direction, competing food sources, use, etc.  However, there is one common denominator when deciding where to place your bait site and that is its proximity to deer bedding locations.  

If you are truly looking to hunt over bait, you need to understand deer movement and how deer would potentially be traveling to and from your bait site. In addition, you need to look at how you might access and hunt that compared to where the deer will already be. Several hunters will throw out bait at a location that best suits their access restrictions or feasibility.  One of the biggest mistakes hunters make is placing bait in locations where deer usually won’t access during daylight shooting hours. As successful as deer bait is, at the end of the day its hard to force a deer to travel to a place they do not want to be. Frustration can quickly set in when hunting over a bait site and seeing minimal deer activity, then returning the next day to hunt that same location only to find your bait pile has been almost entirely consumed.  Mature bucks may become lazy and purposely nocturnal to avoid exposing themselves in daylight.   

Avoid this pitfall by placing your bait near known bedding areas. This will reduce the time it takes for deer to travel when they begin to move out of their beds towards evening feeding locations. This will generate a greater return on your investment of feed and time, and a better overall hunting experience. 

Conversely, if the sole purpose of your bait site is to generate a higher quantity of trail camera photos and night time feeding is not as much of a concern, you will have more options for your bait site locations. Generating intel and surveying your deer herd is extremely valuable for in season recon, developing a hit-list, or watching survivors through the winter. The objective is to create a resource or destination point for deer that positions them directly in front of your camera. Bait sites are a fabulous tool to utilize for this activity.  You do however want to avoid frequently visiting those sites to minimize intrusion. Using a product and a feeding mechanism that reduces routinely trafficking that area will increase your odds of obtaining quality trail camera pictures.

PHOTO: GYT90 is unique from other liquid attractants in that it uses an oil base instead of a water base.  Water based attractants will evaporate and dissipate quicker than oil, which will result in more frequent refills to that bait site.

Deer Bait Station Types

When considering how to distribute your bait, there are several different options available.  Elevated feeders, such as open trough style feeders, gravity fed feeders, and mechanized feeders all create methods to raise your bait pile up off the ground.  The purpose of placing bait in elevated feeders is to minimize the consumption of non-targeted wildlife such as raccoons, squirrels, wild pigs, etc. The easiest feeders to get your hands on are simple gravity feeders, trough feeders, or more advanced deer feeders that dispense feed on the ground below at specific times.  

However, you don’t need to spend tons of money on a feeder to have a productive bait site. In fact, some feeder setups may decrease mature buck usage as some deer just tend to avoid feeder sites and/or camera sites, especially with human scent in the area. 

At the basic level the simplest bait site is a corn pile or mineral site for deer on the ground or on some sort of platform, usually in the form of decaying wood logs or stumps. The rotten wood in a dead log or stump is more absorbent than a freshly fallen tree and will soak in the attractant or mineral. However, minerals alone are not enough to keep deer enticed throughout the fall from their summer patterns. Mineral use decreases as deer diet changes from lush summer forage to acorns, grain, and woody browse. Read more about transitioning mineral sites to attractive hunting bait sites here.

PHOTO: GYT90 has the ability to create a bait site without the use of any additional grain or seed mixed in.  A couple alternatives to the previously discussed corn mixture include simply pouring out GYT90 over a dead log, rotten stump, or directly on exposed soilAnother advantage of using the GYT90 blend is that it can be used just by clearing away some debris and uncovering the bare soil.  Emptying a 1-gallon jug over a few feet of exposed ground will result in consistent heavy deer traffic at that site.

Best Trail Camera Setups Over Deer Bait and Feed Sites

For any bait, feed, hunting, or mineral site a trail camera is a must. Normally, without attraction, trying to funnel deer activity in front of your trail camera can be tricky during certain months of the year depending on the type of habitat that you are in.  Minerals, supplemental feeding products, and deer attractants can all be highly desired by deer at various times on an annual basis. Most trail cameras on the market today have settings that let you adjust the picture resolution and the photo/video frequency.  Reducing the picture resolution to low and extending the trigger frequency between photos will prolong your battery life and extend the time between visits to your camera. You can get away with longer picture/event durations since deer at feed/mineral sites will spend between 3-5 minutes at least feeding at or licking the site.  Adjusting the settings down to that 3-5 minute mark during non-hunting months and then back to a higher frequency of photos (30 seconds- 1 minute) during hunting months. This tactic will prolong battery life, slow down the rate at which the memory cards fill up, and reduce the amount of time you spend checking the site. 

PHOTO: Using a 3-in-1 product like GYT90 takes the guess-work out of it and allows you to provide all the best resources that deer seek throughout the entire year in one single bottle.  More and more hunters are leaving their game cameras out all year long to monitor the herd even in the off-season.

You also want to avoid pouring your bait in an area with mature foliage and tall vegetation.  A location that might be great in the Fall and Winter might not be ideal during Spring and Summer when the temperatures warm and the green-up impacts the photos being taken on your camera.  The last thing you want to see when thumbing through your full SD card is 2,000 photos of grass swaying in the wind. 

Hunting Setups Over Bait

Using the right bait and placing it at the right location are two key factors when hunting over bait, but hunters often overlook the 3rd crucial element that is equally as important.   Stand or blind placement, down to the exact tree or site, as it relates to that bait site must be thoroughly thought out prior to choosing your location.  Again, you want to understand which direction the deer typically travel from (the bedding area) in order to reach your bait site.  Then you want to pinpoint their direction of travel away from the bait site (a large food source). Next, you want to account for the wind direction that will put all the odds in your favor to go undetected when hunting over that bait site.  Finally, you’ll have to figure out how you plan on entering the hunting setup without blowing your wind across the bedding area, bait site, or large food source.

Photo: Form your hunting setup before you place the bait, considering bedding areas, deer travel, larger food sources, tree stand placement, wind direction, and access. More importantly don’t be afraid to shut down a bait site if it’s not working in your favor. 

The ideal setup has the bait site in between your stand and where the deer will travel from, with the wind blowing in your face on your hike in and while hunting.  Shifting winds that blow your scent over the bait pile will result in poor hunting experiences with minimal mature buck sightings. Consider your stand or blind placement and wind direction prior to creating your bait site. Try to also give yourself options.  If the wind isn’t consistent or tends to swirl in that particular location, opt out of hunting it or continuing to bait the site.  It’s hard to pick up a pile of corn after it has been poured, but you can seal a bait or mineral site up if you choose to relocate.

 

Conclusion

Baiting deer for the purposes of hunting is a long tradition that has been refined throughout time.  There is a lot more thought and strategy that goes into it than just dumping out a pile of tasty treats.  Baiting also has several applications that can be utilized for growing and maintaining a healthy deer herd. By understanding what nutrients to look for and which resources contain those nutrients, you can impact the overall attractiveness of your bait site.  Combine that with an effective strategy when scouting and hunting around that bait location and you can maximize your hunting experience year after year!

Note: Check your state’s regulations for baiting, feeding, and attracting wildlife and deer during any time of the year and especially the regulations concerning hunting over bait.

Note: Feeding corn in the winter months, especially in large quantities to a herd that normally does not have access to that type of food source could be dangerous. Since the deer herd might not have enough of the right bacteria to digest corn it can cause acidosis and death for individuals in the herd. Do not feed corn in the winter in large amounts, and if a feed program must be started start in periodic small amounts to allow for the bacteria to adjust in a deer’s stomach.

 

How to Keep Your Mineral Sites from Leaching in the Soil

Whether you’re using mineral to supplement any potential nutritional deficiencies in your deer herd or are using mineral to help you get pictures and inventory any hit list bucks for the upcoming fall, mineral sites can be highly effective. But what do you do if you hunt in an area where you hunting over a mineral site is considered baiting because of the mineral leaching into the soil? Don’t worry, all hope has not been lost! This article will discuss what you can do to prevent deer minerals from leaching and what you can do if you’re trying to restore an old mineral site so it is legal to hunt over.

How to Prevent Leaching

The easiest way to prevent getting yourself into any type of legal trouble where you are required to remove mineral sites is to prevent leaching from the start. Leaching of mineral sites generally occurs after your mineral gets rained on after sitting in one spot for any length of time. The mineral is still available to deer through the soil and that’s why you tend to see deer continually coming back to a mineral site even after the mineral has been depleted. So what can you do to prevent leaching?

There are a few things you can try to prevent leaching. First, you have to make sure that you are using mineral that can be removed from the site. This means that you shouldn’t be mixing mineral directly into the soil if you hope to hunt there in the fall. The second thing you need to make sure of is you are preventing any mineral contaminated rain water from reaching the soil. That is where most people get themselves into trouble. There are several ways you can do this.

Deer Mineral Site Setups That Prevent Leaching

Tub/Bucket: First, you can simply place your mineral in a shallow bucket or tub. Although this method can be effective, there are a couple of things you want to keep in mind. First, you have to remember to take the handle off the bucket if you choose to use one over a shallow tub. It may seem like a crazy possibility, but a deer might work that handle over its head and get the bucket stuck on its head. The other thing to keep in mind is a bucket on the ground can be easily tipped over. If there is any rain water in the bucket and it gets tipped over, then you will still have leaching issues. Burying the bucket in the ground will help provide stability while also still allowing you to remove the bucket when you’re ready. The same concept applies when using an oil pan but you need to monitor these oil pans because they may break if a deer happens to step in them and again, any break may lead to leaching.

Decaying Wood/Stump: Using an old tree stump that you can easily remove will also work for you. Finding a stump that has a depression where you can pour your mineral in is your best bet. You may want to test your stump by soaking it with water first to see if you’ll have any leaching issues. If you do, then you will need to safeguard by using a stump in conjunction with an oil pan or something that will help prevent the leaching. You can simply bury the oil pan and place the stump in it so everything can be removed.

Combine with Feed: Another not so common way to keep minerals from leaching into the soil is by combining them with feed. Liquid deer mineral supplements and deer attractants that contain minerals can be incorporated into deer feed or corn. Simply mix the mineral with the corn or feed, coating it evenly in a bucket or tub. The feed shouldn’t go directly on the ground but instead into a trough, bucket, tub, or gravity deer feeder that doesn’t distribute the seed on the ground.

Regardless of what method you use, you will want to monitor these sites to ensure that you don’t end up with any leaching issues. You don’t necessarily need to check these sites daily or even weekly, but it isn’t a bad idea to check them after a big rain. Take an extra bucket with you in case you need to dump some rain water out. That way you can take it out of the woods and dump it somewhere safe where nobody will be hunting while still leaving the mineral in the woods. You can also replace any pans or buckets that may have developed a crack.

Reclaiming an Old Mineral Site

What happens if hunting over mineral sites suddenly becomes illegal in your area or what if you’re just trying to restore an old mineral site you’ve used for years but no longer want to maintain? You should first contact your local Conservation Officer to ensure you are doing things legally so you won’t be ticketed in the fall, but here are a couple of methods that generally work.

Whatever you do, don’t simply fill in the depression that’s been created by deer with dirt. Deer will still frequent the area and paw at the ground to get to any residual mineral that is left. Instead, you’ll have to invest a little more time and energy to reclaim your mineral site. The first thing you can do is to remove the soil where the mineral site was. Be sure to also remove soil immediately surrounding the site so you can be certain that you removed any minerals that potentially leached out. Next, it’s a good idea to fill the hole in with some type of gravel. Fill the hole about half- to three-quarters full. Then, if you want to be completely sure deer will not be access any leached minerals if there are any to be found, then place a piece of plywood on top of the gravel and place dirt on top of the plywood. Hopefully, you removed all of the leached mineral when you dug the hole, but if you didn’t then filling the hole in with gravel and plywood will prevent deer from being able to paw at the site to reach the leached minerals. Once deer become used to no longer having the minerals readily available, they will stop visiting the old mineral site.

Using supplemental minerals seems like an easy way to make sure deer are getting all of the nutrition they need and can be a fun way to capture photos and videos of bucks you’ll likely be hunting this fall. Whether you find yourself legally obligated to remove your mineral sites before the season, or would like to keep mineral sites and the ground beneath them intact keep these tips in mind for easy removal of mineral sites. This way you can still enjoy the benefits that supplemental mineral sites can provide throughout the spring and summer!

 

GYT90 deer attractant Minerals for deer

How to Maximize Your Trail Camera Pictures This Summer

Trail Camera and Mineral Strategies for Summer Bucks

Trail cameras are widely used by most hunters during two times of the year, summer and fall. Trail cameras are a great way to keep track of new bucks, buck movement, and hunt-able patterns during fall. Fall more or less relates to making observations for hunting but summer is when a lot of critical information beyond just hunting can be generated. This summer data includes fawn recruitment, deer density, and making that all so coveted hit list for the fall. Given the importance of obtaining this type of information, how do you maximize your effectiveness of using trail cameras during the summer? Using supplemental minerals and deer feed to draw deer into your camera sites is a great way to maximize effectiveness. This article will discuss where you should put mineral sites and how many mineral sites you need to increase your effectiveness of using trail cameras.

Mineral and Trail Camera Site Locations

The location of your mineral sites is important to maximize the number of pictures you’ll get. When picking locations it’s important to not overthink it. If your goal is to increase the number of pictures you’re getting, then there’s no need to think about placing mineral sites in high-risk areas such as bedding sites. You don’t need to potentially risk pushing deer out of cover to check your cameras during the summer. Instead, place your mineral sites in areas that are low-risk and are already being frequented by deer. These high-use areas are also particularly important when you are first establishing a mineral site. For example, if you don’t already have an established mineral site for deer on your property, then deer have to learn what supplemental mineral is and where it is located before they will use it consistently. Consistent use of mineral sites translates into more pictures for you. Establishing a mineral site close to a food plot or agricultural field can decrease the amount of time it takes for deer to find these sites. Another location to consider is to establish a site along with a travel corridor so deer can use it on their way from bedding to feeding.

One of the great things about establishing these sites is that deer will continue to use them even after the mineral appears to be gone. This is because rainfall will cause minerals to leach into the soil. This doesn’t mean that you should freshen your mineral sites up because you should. Having a fresh supply of minerals will promote consistent use by deer. But having these established sites means you will have consistent areas to place your cameras year after year.

Mineral Site Density on a Property

Choosing an appropriate number of mineral sites for your property is important when trying to increase the efficiency of running your trail cameras. This may seem counterintuitive, but you can actually have too many mineral sites on a property. But how can that be? More is better, isn’t it? Not necessarily.

Having too many mineral sites on a property will give your deer herd more options which will ultimately spread their use out among the sites and potentially decrease consistency. Decreased consistency translates into decreasing the number of pictures you will get from trail cameras and decrease your ability to pattern deer for the upcoming fall.
So how many mineral sites do you need on your property? A good rule of thumb is generally one mineral site per 100 acres. Depending on what part of the country you live in, an average home range of a buck is about 1000 acres and the average home range of a doe is about 600 acres. That means if you have a property smaller than that, deer are also using your neighbor’s properties. Although mineral sites can help you hold deer on your property, the odds that an individual deer is exclusively using your property is slim and putting multiple mineral sites within a 100-acre property is overkill. However, there are always exceptions. For example, let’s say you hunt 100 acres and have two food plots on opposite ends of the property. Establishing mineral sites in each food plot would allow you to draw in deer from neighboring properties while allowing for enough sites to reduce competition among deer. Each property is unique so you may have to adjust the number of mineral sites you are establishing.

How GYT 90 Increases Your Efficiency

Using a product like GYT 90 can help increase your efficiency when placing mineral sites and maximize the number of pictures you will get during the summer. GYT 90 contains 90 essential minerals so you know your deer herd will be getting the nutritional supplements they need to be healthy. But what makes GYT 90 different from other mineral products is the way it is carried. GYT 90 is carried in crude soybean oil which acts as an additional attractant. Soybean oil produces a superior scent and taste that will help draw deer into your mineral site. What does using GYT 90 mean for you? Using GYT 90 will increase your efficiency meaning that deer will find your mineral sites faster and you will need fewer sites on your property because you will be attracting more deer to each site. This ultimately translates into decreased costs for you as a consumer. GYT 90 is a versatile product and can be used by itself by simply pouring it onto the ground or on a tree stump, or can be mixed with grain to provide additional nutrition to your deer herd.

How to use GYT 90: Corn

How to use GYT 90: Corn

Posted by GYT 90 on Friday, June 1, 2018

If you are actively feeding deer on your property, the use of GYT90 in the feed could double a site for both minerals and feed, lowering site density but increasing site usage and data potential.

Other Considerations

Although using mineral sites may be entirely illegal in some areas, in other areas they are only considered as bait and can still be used and the area can still be hunted if properly handled. Generally speaking, you will need to eliminate leaching of minerals into the soil so when you remove the supplemental mineral, deer stop seeking out any leftover mineral located in the soil. One of the best ways to do this is to use an oil pan or a large bucket to place the mineral in. If you choose to use a bucket, make sure to take the handle off so deer don’t get tangled up in it. It’s also important to make sure whatever you use can hold enough water without overflowing which will ultimately lead to mineral leaching into the soil. You can also use a decaying wood stump, which absorbs the nutrients and allows deer to still consume GYT90. Once you are done with using your trail cameras in that area to inventory bucks or collect data, you simply remove the mineral and you are ready to hunt. About this time, replacing a mineral site with a mock scrape site in the same area could produce a similar attraction to the site even after the mineral is gone for the fall.
Using trail cameras during the summer is just the beginning of building the excitement for the fall hunt. Try some of these tips this summer to help you maximize the number of photos you get with mineral and deer attracting supplements.

 

GYT90 deer attractant Minerals for deer

What Minerals are Important to Bucks When Growing Antlers?

Best Minerals for Deer and Antler Growth

Supplemental minerals have become a staple in deer management. Although most hunters probably use supplemental minerals for several reasons, one of the main reasons is promoting increased herd health, and specifically, to increase antler size. So what minerals are actually used by bucks when growing their antlers? Minerals are categorized as macro- (minerals found in larger quantities in a deer’s body) or micro- (minerals found in lesser quantities in a deer’s body). Unfortunately, deer research describing which macro and microminerals are most used by bucks during antler growth is lacking, but this article will discuss what research has shown this far in terms of what the best minerals for deer and antler growth are.

Macrominerals

Calcium (Ca) and Phosphorous (P) are two macrominerals that are major components in a deer’s skeletal system. For example, 98% of Ca and 80% of P are found within a deer’s bones. Although this is an overwhelming majority, there is still enough Ca and P found in antlers to lead Scientists to do research on whether Ca and P are limiting antler growth. Daily requirements of Ca and P can increase four-fold during antler growth, so it would be logical to assume these macrominerals might be limiting in a deer’s diet. Generally speaking, Ca requirements for free-ranging deer herds can be met by deer simply consuming natural forage and although P may be deficient in some areas, deer tend to be able to meet their P requirements by consuming natural forage as well. Even if deficiencies do occur, deer will switch their diet to consume bones, shed antlers, or even snail or slug shells to meet their requirements. This means that when available through supplementation, deer will go out of their way to find the mineral they need. If switching their diet doesn’t help, then deer will reabsorb Ca and P found within their bones to meet their daily requirements, which is not ideal over offering supplemental minerals.

Although Ca and P don’t appear to be limiting to deer, the ratio of Ca to P that is consumed by deer can be a problem. Ratios of dietary Ca and P that dramatically deviate from 2 parts Ca to 1 part P (for example, more than 7:1 or less than 1:1) can reduce the absorption of the less abundant mineral within the body. This can lead to an imbalance of either Ca or P within the body, which could lead to negative impacts on antler growth.

One macromineral that is limiting in a deer’s diet is sodium (Na). Although Na doesn’t directly impact antler growth, it does influence nerve and muscle function and helps regulate a deer’s body fluid balance. Deer tend to have increased Na requirements during spring and summer when the water content in plants is greatest. This increased water content makes it difficult for a deer to maintain a balance between Na and water within its body. To compensate, deer will often times seek out left-over salt that was spread on the road during the winter or even increase their consumption of aquatic vegetation which has increased amounts of Na. One of the easiest ways you can help deer consume an adequate amount of Na in their diet is to provide them with mineral licks which both bucks and does will use.

Microminerals

Unlike macrominerals, there are no established requirements of microminerals for white-tailed deer, though there are some that appear to be important. Most estimates of microminerals comes from what we know about requirements needed by livestock, but using those requirements for deer can be dangerous because livestock haven’t been bred for efficient mineral use as humans provide them with whatever minerals they need. This may lead to overestimates of microminerals for deer. Regardless, one study conducted on red deer (think of the European version of the North American Elk), showed that copper supplementation helped to increase antler mass for adults. Although other studies have failed to show that relationship between copper and antler mass, they have reported that both copper and zinc can improve a deer’s immune system. Offering minerals with trace amounts of these micronutrients will most likely lead to better overall herd health.

Using GYT 90 Supplement to Improve Your Herd Health

While it may not be 100% clear on what the best minerals are for deer and for antler growth, it is generally understood that offering both micro and macronutrients gives deer the opportunity to achieve the level of minerals they instinctively need. There are also other supplements that can help build a healthier herd, not to mention attract deer.

GYT 90 PROMO

‼️ATTENTION HUNTERS‼️ ATTRACT MORE DEER TO YOUR LOCATION ‼️ GYT 90 harnesses the raw POWER of naturally expelled crude soybean oil! GYT90 creates a sweet and salty treat that deer CANNOT RESIST! To find a local dealer, click here: http://bit.ly/GYT90Dealers

Posted by GYT 90 on Monday, November 13, 2017

Deer go through several stressful periods throughout the year. With obvious periods being the rut and winter for both bucks and does, antler growing season for bucks, and lactation for does. Providing deer with both the minerals and the nutrition they need at these crucial periods can help you reach your management goals. So how can using a supplement like GYT90 help you?

GYT90 offers 90+ minerals, covering all of both the macro and micronutrients known to the research that has been done that might be limiting factors in antler growth. Beyond that, GYT90 offers the minerals with crude soybean oil providing the additional nutritional benefits, calories, and fats to deer during these critical periods of nutritional needs.

GYT90 Uses

You can provide deer these minerals and supplemented nutrition a variety of ways. The first and most beneficial is to pour the GYT90 crude soybean oil and mineral mixture over supplemental feed. This can help attract deer to feed stations during these stressful periods. This can be beneficial for several reasons. First, deer have to learn to like new foods that they haven’t been exposed to before. If you live in an area where there is little to no agriculture or in an area that doesn’t have apple trees, how are deer supposed to know that they like those foods? It’s no different than when people try a new food for the first time or the common problem food plotters experience when offering deer brassicas. Pouring GYT90 over these supplemental feed stations can help draw deer to them faster than usual due to the soybean oil, distinct scent, and salt content. Once deer start to visit these stations, they will also benefit from the essential minerals and nutritional requirements found in GYT90.

How to use GYT 90: Corn

How to use GYT 90: Corn

Posted by GYT 90 on Friday, June 1, 2018

Click here for the other ways to use GYT90 mineral.

So What are the Best Minerals for Deer?

Although there isn’t much research on how beneficial supplemental minerals can be for bucks during the antler growing season, there is one thing we do know for sure; providing deer with minerals and nutrition doesn’t hurt them. By providing supplemental macro and microminerals and extra nutrition throughout the year, you are ensuring that those minerals aren’t limiting to your deer herd, and that antler production can be maximized in the bucks on the property.